Derbyshire · England
Bath Repair for Stanton by Bridge homes
Bath repair for Stanton by Bridge, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
For landlords and businesses
We work for landlords, letting agents and housing providers in Stanton by Bridge as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
About our bath repair in Stanton by Bridge
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and people most often call us about an old repair that has yellowed or come loose and a chip where the taps sit.
Big or small, you get the same one-year guarantee.
- Location
- Stanton by Bridge (DE73)
- Area hub
- Derbyshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath repair in Stanton by Bridge?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Common reasons people in Stanton by Bridge contact us are:
- Rust by the waste and overflow
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
- A failed DIY repair that’s discoloured or lifting
Before booking anyone
- Aftercare advice
- How long the guarantee is and what it covers
- How the colour is matched
- What prep work is covered
Places near Stanton by Bridge
Other services in Stanton by Bridge
Honest limits
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What happens on the day
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why us?
- Nothing taken out or refitted
- Every repair guaranteed for a year
- Usually one visit, start to finish
- Same prices wherever you are
See our full price list or resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- The material
- Access to the area
- The colour and finish to match
- The type of damage
Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- What it’s made of, if you know
- Details of any past repairs
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say right away whether it can be repaired.
Stanton by Bridge: your questions answered
Do you cover Stanton by Bridge?
Yes. We work across the UK and come to Stanton by Bridge and the rest of Derbyshire. Send pictures and we’ll quote, or call 0345 017 0787.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Stanton by Bridge and the surrounding area
Stanton by Bridge is about 5 miles south of Derby, in Derbyshire. Customers in Stanton by Bridge get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our repair technicians cover all 532 towns and villages in Derbyshire, from the larger towns to small villages. We work right across the region, from Stanton by Bridge to Birmingham (about 32 miles away).
Our technicians cover all of the DE73 postcode area. If you are just outside Stanton by Bridge, we cover Swarkestone (1 mile north-west), King's Newton (1 mile south-east), Melbourne (1 mile south-east), Barrow upon Trent (2 miles north-west) and Chellaston (2 miles north). We also work in nearby towns such as Swadlincote (7 miles south-west), Ilkeston (11 miles north-east), Long Eaton (8 miles north-east), Belper (13 miles north), Heanor (13 miles north) and Ripley (14 miles north).
Local landmarks in Stanton by Bridge
Locally, our jobs take us to homes close to Crewe And Harpur Arms, Chellaston Academy and Church of St Michael. The nearest railway station is Peartree station, about 4 miles north. Further afield, we also cover the area around Melbourne Castle (1.6 miles south-east) and Aston Hall Hospital (2.7 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
