Wiltshire · England
Bath chip & crack repair in Upper Town, Wiltshire
Bath repair in and around Upper Town: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
Your questions about bath repair in Upper Town
Do you come to Upper Town?
We do. Repair technicians travel to Upper Town from across the region, and the price is the same as everywhere else.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can I get a quote without a visit?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Bath repair in Upper Town, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. If you are dealing with scratches you can feel with a fingernail and chips under the taps, we can help.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Area
- Upper Town (SN15)
- Region
- Wiltshire
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Upper Town
Other services in Upper Town
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Covering Upper Town
Upper Town is about 5 miles north of Calne, in Wiltshire. Whether you’re in the middle of Upper Town or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 425 places across Wiltshire. You can also see our page for Birmingham, about 66 miles away.
All of SN15 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Christian Malford (1 mile south-west), Dauntsey Lock (1 mile east), Greenman's Lane (1 mile north-east), Dauntsey (2 miles north-east) and Brookside (2 miles west). Larger places within reach include Trowbridge (15 miles south-west), Chippenham (6 miles south-west), Calne (5 miles south), Devizes (12 miles south), Melksham (11 miles south-west) and Corsham (9 miles south-west).
Local landmarks in Upper Town
A little further out are Lyneham Clack Mount (1.2 miles east). Green spaces nearby include Great Wood.
How we price bath repair
Repairs from £95. We charge the same across the UK, including Upper Town. What changes the price is:
- The material
- How many areas need work
- Doing more than one item at once
- Access to the area
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Send photos for a quote
You can typically get a fixed price without us visiting. To help us price it:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
When a repair is not the answer
It helps to know what we can’t do:
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
For anyone letting property in or around Upper Town, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Before we arrive
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We will say straight away whether it can be repaired.
Related advice
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Use a soft cloth and washing-up liquid for everyday cleaning
- A dripping tap stains enamel, so fix it early
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Signs you need bath repair in Upper Town
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a picture if you notice any of these:
- An old repair that has yellowed or come loose
- Holes from dropped items
- Chips caused by builders
- Rusty patches near the plughole
What your quote should include
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
- What happens if they find more damage
- Whether the price covers travel
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
