Moray · Scotland
Bath re-enamelling & resurfacing in Alves, Moray
Full bath re-enamelling and resurfacing in Alves, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
Bath re-enamelling at your home in Alves
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, with the bath ready to use the following day. Whether it’s thin, worn enamel in places and chips and rust in more than one place, we can usually put it right, whatever the material.
All our work is covered by a one-year guarantee, wherever you are in Moray.
- Area
- Alves (IV30)
- Area hub
- Moray
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Alves
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you quote from pictures?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What happens next?
You’ll get a fixed quote back, plus dates. You are under no obligation.
When we’d advise against a repair
A repair isn’t right for every job, for example:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
The process
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow most of the day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Before we arrive
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Getting a price
For a price in Alves, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- The colour and finish to match
- The type of damage
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- Any details about the material
- Details of any past repairs
- A close-up of the damage, in focus
- Natural light rather than flash
Email us a photo of the damage and one of the entire item, with your IV30 postcode, and we will come back with a fixed quote.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Covering Alves
Alves is about 5 miles west of Elgin, in Moray. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 58 towns and villages in Moray, from the larger towns to small villages.
All of IV30 is covered. Streets in the area include Moir Street, Main Road and Carden Close. Nearby, we also work in Newton (2 miles east), College of Roseisle (3 miles north), Miltonduff (3 miles south-east), Kinloss (4 miles west) and Pittendreich (4 miles east). Larger places within reach include Elgin (5 miles east), Forres (7 miles west), Lossiemouth (8 miles north-east), Ashgrove (6 miles east), Burghead (4 miles north) and Fochabers (13 miles east). Remote and island addresses take a little more planning, so call us to arrange it.
Landmarks near Alves
In Alves, that means homes near Old Parish Church, among other places. Nearby you will also find Sparrow Castle (0.8 miles north) and The Oaks (4.1 miles east).
Places near Alves
More services for Alves
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Prices start from £350. We charge the same wherever you are, with no extra for Alves. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Colour-matched on site
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
Take a look at our prices page or guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
