Warwickshire · England
Bath re-enamelling & resurfacing in Baddesley Ensor, Warwickshire
Our repair technicians come to Baddesley Ensor for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
About our bath re-enamelling in Baddesley Ensor
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a period or roll-top bath worth keeping and chips and rust in more than one place, we can normally put it right, whatever the material.
All our work comes with our one-year guarantee, wherever you are in Warwickshire.
- Where
- Baddesley Ensor (CV9)
- Region
- Warwickshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Baddesley Ensor?
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things clients typically mention when they call are:
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
- A coating lifting around the plughole
- Wear marks under the taps
What to look for in a quote
- What happens if they find more damage
- When it can be used again
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly.
Materials we work on in Baddesley Ensor
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- A year’s guarantee on all work
- Fixed prices from your photos
- No need to remove anything
- Colour mixed on the day to match
Take a look at our full price list or bath cost comparison.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take most of the day, tidy-up included.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
- Have a window or extractor fan available
How to get a price
Upload pictures of the damage and a wider shot of the entire item, with your CV9 postcode, and we will come back with a fixed quote.
Read more
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The colour and finish to match
- What kind of damage it is
- Where the damage is and how we get to it
- Doing more than one item at once
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
You can normally get a fixed price without us visiting. To help us price it:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Natural light rather than flash
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Baddesley Ensor and the surrounding area
Baddesley Ensor is about 5 miles south-east of Tamworth, in Warwickshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 324 towns and villages across Warwickshire. Our nearest city page is Birmingham, about 14 miles away.
All of CV9 is covered, from the main roads to the quietest streets. Local streets include Keys Hill, New Street and Post Office Road. We also travel to Wood End (2 miles west), Hurley Common (2 miles south-west), Freasley (2 miles north-west), Hurley (2 miles south-west) and Piccadilly (3 miles west). We also work in nearby towns such as Nuneaton (7 miles south-east), Bedworth (9 miles south-east), Fordbridge (9 miles south-west), Castle Vale (9 miles south-west), Chilvers Coton (7 miles south-east) and Camp Hill (5 miles south-east).
Around Baddesley Ensor
We visit homes around Church of St Nicholas, Woodside CofE Primary School and The Polesworth School. The closest station to Baddesley Ensor is Atherstone station, roughly 2 miles east of the centre. Well-known places in the area include Sir Robert Peel Community Hospital (5.9 miles north-west) and Ratcliffe Culey (3.5 miles east). For a walk, there is Middleton Lakes RSPB reserve.
Also near Baddesley Ensor
Also in Baddesley Ensor
Baddesley Ensor: your questions answered
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What areas do you cover?
All of Warwickshire, and the rest of the UK. There is no extra charge for travel.
Do you cover Baddesley Ensor?
We do. We send a technician to Baddesley Ensor for every job, and the price is the same as everywhere else.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Looking after it afterwards
It’s all simple stuff:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
