Perth and Kinross · Scotland
Bath Re-enamelling for Balbeggie homes
Bath re-enamelling across Balbeggie and nearby, normally in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
Repair or replace in Balbeggie?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Balbeggie clients choose us
- Typically one visit, start to finish
- Dust sheets down, tidy finish
- No extra charge for your area
- Colour mixed on the day to match
Read our prices page and resurfacing vs replacement cost guide.
About our bath re-enamelling in Balbeggie
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with an original cast iron bath that needs restoring and staining under the taps and around the waste, we can help.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Location
- Balbeggie (PH2)
- County
- Perth and Kinross
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Balbeggie
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.
Send us a photo if you notice any of these:
- A roll-top that’s seen better days
- Several chips and rust patches
- Staining under the taps and around the waste
- A coating lifting around the plughole
Comparing quotes
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- What aftercare is recommended
- How the colour is matched
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which generally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Ask for a price
Most clients in Balbeggie get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Common questions in Balbeggie
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
How long is the bath unusable?
Usually one day, with the bath ready the day after. A badly pitted bath can need a second day.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Also in Balbeggie
Balbeggie and the surrounding area
Balbeggie is about 5 miles north-east of Perth, in Perth and Kinross. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 107 towns and villages across Perth and Kinross, from the larger towns to small villages. We work right across the region, from Balbeggie to Edinburgh (35 miles away).
Jobs in PH2 work the same way as everywhere else we cover. Local streets include Beechgrove, Armadale Crescent and St Martins Road, and we cover them all. Nearby, we also work in Kinrossie (2 miles north-east), Wolfhill (3 miles north), Guildtown (3 miles north-west), Scone (3 miles south-west) and Stormontfield (4 miles west). Further out, we also cover Perth (5 miles south-west), Blairgowrie and Rattray (10 miles north), Letham (6 miles south-west), Tulloch (5 miles south-west), Alyth (13 miles north) and Coupar Angus (7 miles north-east).
Around Balbeggie
In Balbeggie, that means homes near Balbeggie. Well-known places in the area include Inchbervis Castle (3.6 miles north-west) and Perth Royal Infirmary (4.2 miles south-west). Not far away are Dunsinane Hill.
What we cannot put right
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
For landlords and businesses
We work for landlords, letting agents and housing providers in Balbeggie as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Any details about the material
- One sharp close-up of the damage
- Details of any past repairs
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
