Kent · England

Bath Re-enamelling in Buttsole

Full bath re-enamelling and resurfacing at your home in Buttsole, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Buttsole homes

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Repair dripping taps early
  • Store bottles off the bath
  • Never use suction bath mats
  • Have chips seen to early

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Bath re-enamelling at your home in Buttsole

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and the jobs we see most are a peeling or bubbling previous coating and an outdated colour you’d like to change.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Where
Buttsole (CT13, CT14)
County
Kent
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

When we would advise against a repair

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • A metal bath with a through crack
  • Damage hidden under a previous coating, until it’s stripped back
  • Holes rusted through the metal

If in doubt, send photos and we will say what we think before booking.

Surfaces we repair

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Our work in Buttsole

Buttsole is about 4 miles north-west of Deal, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Buttsole is one of 922 places in Kent where we work. Our jobs stretch from Buttsole to London (about 63 miles away).

Our technicians cover all of CT13 and CT14 and the streets around it. Local streets include Mill Lane, Liss Road and High Street, all of which we cover. We also cover the places around Buttsole: Eastry (1 mile north), Ham (1 mile east), Statenborough (1 mile north-east), Marley (2 miles east) and Felderland (2 miles north-east). Within a short drive, we also cover Canterbury (10 miles west), Margate (10 miles north), Dover (7 miles south), Folkestone (12 miles south-west), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).

Around Buttsole

Locally, our jobs take us to homes close to Eastry Church of England Primary School, The Five Bells pub and Church of St Mary the Virgin and the streets around them. Nearby too are Sandwich Technology School (2 miles north-east) and Ham Fen (1.3 miles north-east). The nearest railway station is Sandwich station, about 2.5 miles north-east of the centre. Nearby you will also find The Precinct Toy Collection (2.8 miles north-east) and Sandown Castle (4.1 miles east). The countryside around Buttsole includes Monk's Wall nature reserve.

Map of Buttsole © OpenStreetMap contributors

Your questions about bath re-enamelling in Buttsole

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

How long does re-enamelling take?

Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.

What information do you need?

Use the quote form or ring 0345 017 0787, and we’ll do the rest.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Can I add another job to the visit?

Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.

Do the materials smell?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Can you repair something that’s been repaired before?

Generally, yes. Let us know what was used before and we will plan for it.

How it works

Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a full day. The room is left tidy.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Let us know if it has been repaired before
  • Keep pets and children out of the room while we work

Ask for a price

Send us pictures of the damage and one of the whole item, and tell us you’re in Buttsole, and we will reply with a fixed quote.

Send pictures for a quote

Advice

Landlord and trade work in Buttsole

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

What affects the price in Buttsole

Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:

  • How many areas need work
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • The material

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Do you need bath re-enamelling in Buttsole?

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

It’s worth getting a quote if you see:

  • Lots of chips and rust spots
  • An old resurfacing that’s failing
  • A dull, rough surface that will not come clean
  • An outdated colour you’d like to change

Questions to ask before you book

  • Who turns up on the day
  • Aftercare advice
  • Whether there are any call-out or travel charges
  • What happens if they find more damage

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.