Lancashire · England
Bath re-enamelling & resurfacing in Claughton, Lancashire
Full bath re-enamelling and resurfacing at your home in Claughton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
What we’re called out for in Claughton
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- A roll-top that is seen better days
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
Comparing quotes
- How soon you can use it again
- How long the guarantee is and what it covers
- What prep work is covered
- Who will actually do the work
Bath re-enamelling in Claughton without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a bath in a colour that no longer suits and an old resurfacing that’s failing, in basins & shower trays, Victorian roll-tops and acrylic baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Claughton (PR3)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Claughton
Other services in Claughton
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Our work in Claughton
Claughton is about 6 miles north-west of Longridge, in Lancashire. We visit customers in Claughton and the surrounding area, so nothing has to leave your home. Claughton is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Liverpool, about 33 miles away.
Every address in PR3 is within our area. Close by, we cover Matshead (1 mile south), Stubbins (1 mile west), Catterall (2 miles west), Bilsborrow (2 miles south-west) and Bruna Hill (2 miles north-west). Larger places within reach include Preston (8 miles south), Lancaster (12 miles north), Lytham St Anne's (14 miles south-west), Bamber Bridge (10 miles south), Morecambe (14 miles north) and Leyland (13 miles south).
Around Claughton
Locally, our jobs take us to homes close to Garstang Community Academy, St Mary's Catholic Primary School and Church of St Thomas, among other places. Other landmarks nearby include Royal Preston Hospital (5.9 miles south) and Greenhalgh Castle (2.3 miles north-west). Green spaces nearby include Beacon Fell.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think before you book.
What we work on
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow the best part of a day from start to finish. Before we go, we will explain when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
How to get a price
Email us a photo of the damage and one of the entire item, and tell us you’re in Claughton, and we’ll come back with a fixed quote.
Advice
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- The colour and finish to match
- Access to the area
- Whether old repairs or coatings need taking off
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
Two or three clear photos are normally enough. It helps if you send:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- One sharp close-up of the damage
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say immediately if a repair is the right fix.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Claughton, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
Looking after it afterwards
Nothing complicated is needed:
- Rinse off hair dye, oils and bath bombs immediately
- Repair dripping taps early
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Common questions in Claughton
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do the materials smell?
There may be a mild smell during the work.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I get a price for bath re-enamelling in Claughton?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
About our accreditations · Every repair comes with a one-year guarantee.
