Greater London · England
Bath Re-enamelling in Gordon Hill
Bath re-enamelling in and around Gordon Hill: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Bath re-enamelling in Gordon Hill, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Whether it’s thin, worn enamel in places and several chips and rust patches, we can help.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Location
- Gordon Hill (EN2, EN1)
- Area hub
- Greater London
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Gordon Hill: your questions answered
What happens after I send photos?
We review the photos and send a fixed quote.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What areas do you cover?
The entire UK, including all of Greater London. Just include your postcode and we will confirm dates.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Signs you need bath re-enamelling in Gordon Hill
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- A coloured bath you want in white
- Staining under the taps and around the waste
- Several chips and rust patches
- A coating lifting around the plughole
Before you book anyone
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
Nearby places to Gordon Hill
What else we do in Gordon Hill
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Aftercare tips
It’s all simple stuff:
- Do not leave a chip unrepaired
- Never use suction bath mats
- Repair dripping taps early
- Store bottles off the bath
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Same prices wherever you are
- We leave the room as we found it
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
Take a look at our prices page and bath cost comparison.
Gordon Hill and the surrounding area
Gordon Hill is about 3 miles north of Edmonton, in Greater London. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Gordon Hill is one of 764 towns and villages in Greater London where we work. You can also see our page for London, about 11 miles away.
Our visits in EN2 and EN1 work the same way as everywhere else we cover. Whether you live on Lea Road, Farr Road and Manor Road or anywhere nearby, we can come to you. We also cover the places around Gordon Hill: Clay Hill (1 mile north), Enfield Chase (1 mile south-west), Forty Hill (1 mile east), Enfield (1 mile south) and Crews Hill (1 mile north-west). We also work in nearby towns such as London (11 miles south), City of Westminster (11 miles south), Marylebone (10 miles south), Kensington (12 miles south-west), St Pancras (10 miles south) and Shoreditch (10 miles south).
Landmarks near Gordon Hill
Locally, our jobs take us to homes close to St Michael's CofE Primary School, Chace Community School and Russet House School and the streets around them. Other local landmarks include The Wonder pub (under half a mile south-east), St Michael & All Angels (under half a mile south) and Enfield Town Park (1.1 miles south). There’s a railway station in Gordon Hill itself: Gordon Hill station. Nearby you will also find Municipal Borough of Enfield (under half a mile north) and Museum of Enfield (1 mile south). For a walk, there’s Pole Hill and Bowyer's Water.
When we would advise against a repair
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A bath that’s rusted through
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- Access to the area
- What kind of damage it is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your photos
Most quotes are done from pictures alone. To help us price it:
- Something in shot to show the size
- A photo taken from further back
- What it’s made of, if you know
- Where you are, by postcode
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the day after.
Before we arrive
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
