Shropshire · England
Bath re-enamelling & resurfacing in Cruckmeole, Shropshire
Bath re-enamelling for Cruckmeole, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Wear marks under the taps
- A coating lifting around the plughole
About our bath re-enamelling in Cruckmeole
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, in pressed steel baths, basins & shower trays and cast iron baths.
Every job is backed for twelve months in Cruckmeole and everywhere else. We return to put right any problem with the work.
- Location
- Cruckmeole (SY5)
- Area hub
- Shropshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Cruckmeole
Do you work in Cruckmeole?
Yes. We work across the UK and travel to Cruckmeole and the rest of Shropshire. Send us photos for a fixed quote, or call 0345 017 0787.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Which areas do you work in?
We work UK-wide, and that includes Cruckmeole. Our prices are the same everywhere.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
When a repair isn’t the answer
A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About Cruckmeole
Cruckmeole is about 4 miles south-west of Kingsland, in Shropshire. Our technicians come to customers in Cruckmeole, so there is no workshop to go to. We work in 433 places in Shropshire, from the larger towns to small villages. Our jobs stretch from Cruckmeole to Birmingham (about 42 miles away).
Postcode districts we cover here: SY5. If you are just outside Cruckmeole, we cover Cruckton (1 mile north), Hanwood (1 mile east), Arscott (1 mile south), Hanwood Bank (1 mile north-east) and Plealey (2 miles south). Further out, we also cover Shrewsbury (4 miles north-east), Oswestry (15 miles north-west), Coleham (4 miles north-east), Kingsland (4 miles north-east), Belle Vue (4 miles east) and Monkmoor (5 miles north-east).
Around Cruckmeole
We visit homes around Hare & Hounds pub, St Thomas and St Anne CofE Primary School and Church of St Thomas. The closest station to Cruckmeole is Shrewsbury station, roughly 4.5 miles north-east. Well-known places in the area include The Parade Shopping Centre (2.9 miles north-east) and Shelton Hospital (2.8 miles north-east). The countryside around Cruckmeole includes Bomere Pool.
Landlord and trade work in Cruckmeole
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What affects the price in Cruckmeole
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- The material
- The colour and finish to match
- How much damage there is
- Where the damage is and how we get to it
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take most of the day, and we’ll tell you if anything changes.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
- Clear the area around the damage
Ask for a price
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Cruckmeole, and we will come back with a fixed quote.
Advice
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Looking after it afterwards
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs immediately
- Leave the bath for the full curing time before using it
- Repair dripping taps early
- Avoid suction-cup mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Also in Cruckmeole
Do you need bath re-enamelling in Cruckmeole?
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Customers normally contact us about:
- Worn patches where water runs and sits
- Several chips and rust patches
- Staining under the taps and around the waste
- A roll-top that is seen better days
What to look for in a quote
- If travel is included in the price
- How to look after the finish
- A fixed quote, and whether VAT is included
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
