Shropshire · England

Bath re-enamelling & resurfacing in Longden, Shropshire

Fixed-price bath re-enamelling in Longden and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Longden

Longden questions

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

Can you do the outside of a roll-top?

Yes, often. The inside is resurfaced, and we can refinish the outside as well.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Is there a call-out fee?

There is no separate call-out charge. The fixed quote covers the visit and the work.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

How we handle bath re-enamelling in Longden

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We work on cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a coloured bath you want in white and wear marks under the taps.

Your repair is guaranteed for a year, as with every job we do.

Technician in a mask working on a freestanding roll-top bath
Area
Longden (SY5)
County
Shropshire
Warranty
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

When to call us in Longden

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

It’s worth getting a quote if you see:

  • A coating lifting around the plughole
  • A bath in a colour that no longer suits
  • Several chips and rust patches
  • Worn patches where water runs and sits

What to look for in a quote

  • How the room is protected while they work
  • A fixed price, and whether VAT is included
  • Who turns up on the day
  • Aftercare advice

10 questions to ask before you book

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can typically be used the following day.

How to prepare

  • Open a window if you can
  • Avoid using the area for a few hours before we arrive
  • Tell us if there are stairs or a lift

Getting a price

Send us a photo of the damage and one of the whole item, and tell us you’re in Longden, and we will come back with a fixed quote.

Send pictures for a quote

Advice

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

What bath re-enamelling costs

Resurfacing from £350. We price every job individually, from your photos. What matters most is:

  • How much damage there is
  • The material and finish
  • How hard the colour is to match
  • Whether we combine several jobs

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

Getting a price from photos

Phone pictures are fine, there is no need for anything special. Ensure they show:

  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Your postcode, so we can check dates

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

When we would advise against a repair

To be straight with you, some problems need a different fix:

  • Damage hidden under a previous coating, until it’s stripped back
  • A bath split right through the body
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths

Aftercare tips

To keep it looking its best for years:

  • Fix dripping taps quickly
  • Use washing-up liquid and a soft cloth
  • Never use suction bath mats
  • Rinse off hair dye, oils and bath bombs straight away

Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

About Longden

Longden is about 5 miles south-west of Shrewsbury, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Longden is one of 433 places in Shropshire we cover. You can also see our page for Birmingham, about 41 miles away.

Postcode districts we cover here: SY5. We regularly work on streets such as Shrewsbury Road, Little Barnyard and Well Mead Lane. Other places close to Longden include Arscott (1 mile north-west), Exfords Green (1 mile south-east), Plealey (1 mile west), Longden Common (1 mile south) and Hanwood (2 miles north). Further out, we also cover Shrewsbury (5 miles north-east), Coleham (5 miles north-east), Kingsland (5 miles north-east), Belle Vue (4 miles north-east), Monkmoor (6 miles north-east) and Bagley (5 miles north-east).

Landmarks near Longden

We visit homes around Church of St Ruthen and Longden CofE Primary School, among other places. Other landmarks nearby include Beeches Hospital (2.5 miles north-east) and The Parade Shopping Centre (3.9 miles north). The countryside around Longden includes Bomere Pool.

Map of Longden © OpenStreetMap contributors

Repairing versus replacing in Longden

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Longden. What changes the price is the job itself: the material, the amount of damage and how many items.

Why Longden customers choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Dust sheets down, tidy finish
  • Every repair guaranteed for a year
  • Most jobs done in one visit

See our pricing and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.