Moray · Scotland
Bath Re-enamelling for Mundole homes
Full bath re-enamelling and resurfacing for homes and businesses in Mundole and across Moray. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Wear marks under the taps
- Chips and rust in more than one place
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our bath re-enamelling in Mundole
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We are often asked to fix an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, on cast iron baths, acrylic baths and Victorian roll-tops.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Mundole (IV36)
- County
- Moray
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What else we do in Mundole
Common questions in Mundole
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Mundole.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Moray and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- One price list for the whole UK
- We come to you, anywhere in the UK
Take a look at our pricing and guide to resurfacing and replacement costs.
Covering Mundole
Mundole is about 2 miles south-west of Forres, in Moray. Whether you are in the middle of Mundole or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 58 places across Moray, from the larger towns to small villages.
Jobs in IV36 are booked in the same way as anywhere else. Local streets include Findhorn Park, Leaffoney Lane and Spring Bank. We also cover the places around Mundole: Red Craig (1 mile north), Forres (2 miles north-east), Dyke (2 miles north-west), Rafford (3 miles east) and Moor of Granary (4 miles east). Within a short drive, we also cover Elgin (13 miles east), Ashgrove (13 miles east), Burghead (10 miles north-east), Hopeman (11 miles north-east) and Kinloss (5 miles north-east). If you’re somewhere remote, call first so we can plan the visit.
Local landmarks in Mundole
Typical jobs here are in homes near Roysvale Park and Forres Academy and the streets around them. For rail, the closest station is Forres station, roughly 1.7 miles north-east of the centre. A little further out are Darnaway Castle (1.7 miles south-west) and DALLAS DHU HISTORIC DISTILLERY (1.9 miles east). For a walk, there is Cluny Hill and Loch of Blairs.
What we’re called out for in Mundole
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Get in touch if you’ve noticed:
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- A coloured bath you want in white
Questions to ask before booking
- Whether the price covers travel
- How to look after the finish
- Who turns up on the day
- The length of the guarantee and what it covers
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- A bath that is rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Mundole
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- How many items we do on one visit
- Access to the area
- What the surface is made of
- How much damage there is
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
The process
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a full day in most cases. We leave the room clean and you’ll know when it can be used.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
