Moray · Scotland

Bath Re-enamelling for Findhorn homes

Bath re-enamelling for Findhorn, without a refit. Send us photos for a fixed price, then book a visit.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Findhorn

Bath re-enamelling in Findhorn, done in place

The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Common call-outs are for enamel that’s lost its shine and feels rough and an outdated colour you’d like to change, in pressed steel baths, Victorian roll-tops and basins & shower trays.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Technician in a mask working on a freestanding roll-top bath
Where
Findhorn (IV36)
County
Moray
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Should you replace it?

Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Why choose Surface Doctor in Findhorn

  • No extra charge for your area
  • CHAS and Constructionline accredited
  • Dust sheets down, tidy finish
  • Honest advice, even when it means no job

Take a look at our full price list and bath cost comparison.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Landlords, letting agents and housing providers in Findhorn use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

Signs you need bath re-enamelling in Findhorn

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.

The most common problems we are called about are:

  • A bath in a colour that no longer suits
  • Stains that won’t shift
  • Wear marks under the taps
  • A roll-top that is seen better days

Before you book anyone

  • What happens if the damage is worse than the pictures show
  • What protection goes down before work starts
  • Whether a trained technician does the job
  • How long the guarantee is and what it covers

Choosing a repair company

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift
  • Point us to the nearest place to park

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a free quote

Related advice

Keeping it looking good

It’s all simple stuff:

  • Avoid suction-cup mats
  • Get any chip repaired quickly
  • Rinse off hair dye, oils and bath bombs immediately
  • Use washing-up liquid and a soft cloth

Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

Where we work around Findhorn

Findhorn is about 4 miles north of Forres, in Moray. Anywhere in IV36, a technician comes to you. Our technicians cover all 58 towns and villages in Moray, from the larger towns to small villages.

Every address in IV36 is within our area. You will find streets such as Elvin Place, Cromarty Court and Fyrish Road, all of which we cover. If you are just outside Findhorn, we cover Kinloss (2 miles south-east), Forres (4 miles south), Red Craig (4 miles south-west), Mundole (5 miles south-west) and Dyke (5 miles south-west). We also work in nearby towns such as Elgin (11 miles east), Lossiemouth (12 miles east), Ashgrove (11 miles east), Burghead (5 miles north-east), Hopeman (7 miles north-east) and Lhanbryde (14 miles east). For island and remote addresses, ring us first and we’ll plan the trip.

What’s near Findhorn

Locally, our jobs take us to homes close to Findhorn Parish Church and Church Hall. The closest station to Findhorn is Forres station, about 3.2 miles south of the centre. Well-known places in the area include Findhorn Heritage Centre (0.5 miles north-west) and Forres Castle (3.3 miles south). For a walk, there’s Sanquhar Loch and Culbin Sandhills.

Map of Findhorn © OpenStreetMap contributors

Your questions about bath re-enamelling in Findhorn

Can a failed resurfacing be redone?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

Is there a call-out fee?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote with dates.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Can landlords book you?

Yes, frequently. We can quote for several properties together and work between tenancies.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

When a repair is not the answer

A repair isn’t always the answer, and we would rather say so up front. We cannot fix:

  • A metal bath with a through crack
  • A poorly supported acrylic bath, until it’s firmed up
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.