Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Felton, Bath and North East Somerset
Full bath re-enamelling and resurfacing at your home in Felton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
Bath re-enamelling in Felton, done in place
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Whether it’s a coating lifting around the plughole and enamel that’s lost its shine and feels rough, we can help, whatever the material.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Where
- Felton (BS40)
- Area hub
- Bath and North East Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Felton
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Most people contact us after spotting one of these:
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
- Wear marks under the taps
- A coloured bath you want in white
Before you book anyone
- What the guarantee covers, and for how long
- How long it needs to cure
- Aftercare advice
- Whether they match the colour on site
Landlords, agents and businesses in Felton
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Our work in Felton
Felton is about 4 miles south-east of Nailsea, in Bath and North East Somerset. Wherever you are in the BS40 postcode area, a technician comes to you. Felton is one of 136 towns and villages in Bath and North East Somerset we cover.
Here we cover the BS40 postcode area. Jobs here include addresses on Frog Lane, Hillview Gardens and Stanshalls Lane. Nearby, we also work in Winford (1 mile east), Upper Littleton (2 miles south-east), Hounsley Batch (2 miles south-east), Regil (2 miles south-east) and Littleton (2 miles south-east). We also work in nearby towns such as Bath (14 miles east), Keynsham (8 miles east), Bathwick (14 miles east), Walcot (14 miles east), Westmoreland (13 miles east) and Kingsmead (13 miles east).
Around Felton
Around Felton, we work in homes near Winford Church of England Primary School, The George And Dragon Public House and Saint Katherine's Church, among other places. The nearest railway station is Nailsea & Backwell station, roughly 3.5 miles north-west. Other landmarks nearby include Barrow Hospital (2.3 miles north-east). Not far away are Backwell Lake and Dundry Hill.
Keeping it looking good
To keep it looking its best:
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Have chips seen to early
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
When a repair isn’t the answer
It helps to know what we can’t do:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Your questions about bath re-enamelling in Felton
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Should you replace it?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
What you get with us
- Straight answers about what a repair can do
- No extra charge for your area
- Colour-matched on site
- Rooms protected and left tidy
Read our prices page or guide to resurfacing and replacement costs.
Nearby places to Felton
What else we do in Felton
What affects the price in Felton
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Access to the area
- How much damage there is
- Unusual colours or finishes
- What the surface is made of
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from pictures
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A photo taken from further back
- One sharp close-up of the damage
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
