Bath and North East Somerset · England
Bath Re-enamelling for Regil homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Regil. Send photos for a free, fixed quote.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
Do you need bath re-enamelling in Regil?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Customers generally contact us about:
- Worn patches where water runs and sits
- A coloured bath you want in white
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
What your quote should include
- If travel is included in the price
- Whether the colour is mixed to match
- How soon you can use it again
- What prep work is covered
Bath re-enamelling in Regil without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for a coloured bath you want in white and stains that won’t shift, in Victorian roll-tops, basins & shower trays and cast iron baths.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Regil (BS40)
- County
- Bath and North East Somerset
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Our work in Regil
Regil is about 6 miles south-east of Nailsea, in Bath and North East Somerset. We travel to customers in Regil and nearby villages, so nothing has to leave your home. Regil is one of 136 places in Bath and North East Somerset we cover.
Our visits in BS40 are booked in the same way as anywhere else. We also cover the places around Regil: Hounsley Batch (1 mile north-east), Lower Strode (1 mile south), Littleton (1 mile north-east), Chew Stoke (1 mile east) and Upper Littleton (1 mile north-east). Further out, we also cover Bath (13 miles east), Keynsham (8 miles north-east), Bathwick (13 miles east), Walcot (13 miles east), Westmoreland (12 miles east) and Kingsmead (13 miles east).
Near you in Regil
In Regil, that means homes near Chew Stoke Church School, Chew Valley School and St James, among other places. Nearby you’ll also find Oval enclosure (4.1 miles south-east) and Barrow Hospital (4 miles north). Open spaces near Regil include Dundry Hill.
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- How much damage there is
- The type of damage
- How easy the damage is to reach
- Any earlier repairs that need removing first
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why us?
- No need to remove anything
- Free fixed quotes from pictures
- We leave the room as we found it
- Typically one visit, start to finish
See our full price list or bath cost comparison.
Other services in Regil
Landlord and trade work in Regil
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs in Bath and North East Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Common questions in Regil
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you quote from photos?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
What happens on the day
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It typically takes a full day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Read more
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
