Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Winford, Bath and North East Somerset
Bath re-enamelling in and around Winford: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that won’t shift
- Several chips and rust patches
About our bath re-enamelling in Winford
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. If you’re dealing with chips and rust in more than one place and a dull, rough surface that won’t come clean, we can usually put it right, on cast iron baths, pressed steel baths and basins & shower trays alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Winford (BS40)
- Region
- Bath and North East Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Winford
Winford is about 5 miles south-east of Nailsea, in Bath and North East Somerset. Jobs in Winford are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Our technicians cover 136 places in Bath and North East Somerset, from the larger towns to small villages.
Here we cover the BS40 postcode area. Jobs here include addresses on Market Place, High Street and Church Road. We also travel to Upper Littleton (1 mile south-east), Felton (1 mile west), Hounsley Batch (1 mile south), Littleton (1 mile south-east) and Regil (2 miles south). Larger places within reach include Bath (13 miles east), Keynsham (7 miles east), Bathwick (13 miles east), Walcot (13 miles east), Westmoreland (12 miles east) and Kingsmead (12 miles east).
What’s near Winford
In Winford, that means homes near Church of St Mary and St Peter, Winford Church of England Primary School and Chew Valley School, among other places. The closest station to Winford is Parson Street station, roughly 4.2 miles north-east of the centre. Nearby you’ll also find Barrow Hospital (2.4 miles north). Open spaces near Winford include Dundry Hill and Backwell Lake.
Landlord and trade work in Winford
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Why Winford clients choose us
- One price list for the whole UK
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
Take a look at our pricing and guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Aftercare tips
To keep it looking its best for years:
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When a repair isn’t the answer
It helps to know what we cannot do too:
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Common problems we fix in Winford
Hard water speeds up the wear, and abrasive cleaners do the most damage.
These are the problems we are asked about most:
- A coloured bath you want in white
- Staining under the taps and around the waste
- Several chips and rust patches
- A coating lifting around the plughole
What your quote should include
- A fixed price, and whether VAT is included
- What protection goes down before work starts
- Whether they match the colour on site
- Who will actually do the work
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Winford questions
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What happens once I’ve sent photos?
We review the photos and send a fixed quote.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
How to get a price
For a price in Winford, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Places near Winford
Other services in Winford
About our accreditations · Every repair comes with a one-year guarantee.
