Flintshire · England
Bath re-enamelling & resurfacing in Garden City, Flintshire
Fixed-price bath re-enamelling in Garden City and the surrounding area, normally in one visit.
- Resurfacing from £350
- A roll-top that’s seen better days
- A dull, rough surface that won’t come clean
Landlord and trade work in Garden City
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Garden City, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Bath re-enamelling at your home in Garden City
Most baths are re-enamelled in a day, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair acrylic baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are a coloured bath you want in white and wear marks under the taps.
All our work is covered by our one-year guarantee.
- Area
- Garden City (CH5)
- Area hub
- Flintshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Garden City
Also in Garden City
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Get any chip repaired quickly
- Avoid suction-cup mats
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What we are called out for in Garden City
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Get in touch if you’ve noticed:
- A coating lifting around the plughole
- Several chips and rust patches
- An original cast iron bath that needs restoring
- Wear marks under the taps
What to look for in a quote
- What happens if they find more damage
- What the guarantee covers, and for how long
- What prep work is covered
- Aftercare advice
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes most of the day in most cases. We leave the room clean.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep pets and children out of the room while we work
- Open a window if you can
- Move bottles, mats and clutter away from the area
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Repairing versus replacing in Garden City
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Garden City
- One-year guarantee on every repair
- One price list for the whole UK
- CHAS and Constructionline accredited
- One visit for most repairs
See our pricing and guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How many areas need work
- How easy the damage is to reach
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- A picture taken from further back
- Details of any past repairs
- The material, if you know it
For a price in Garden City, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What we can’t put right
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Garden City: your questions answered
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you come to Garden City?
We do. We send a technician to Garden City for every job, with no extra charge for travel.
Do you cover the entire of Flintshire?
We work UK-wide, and that includes Garden City. Our prices are the same everywhere.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Covering Garden City
Garden City is about 2 miles east of Connah's Quay, in Flintshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 139 towns and villages in Flintshire, from the larger towns to small villages. You can also see our page for Liverpool, about 14 miles away.
Here we cover the CH5 postcode area. Streets in the area include Dee Road, Sandy Lane and Stafford Road, and we cover them all. Other places close to Garden City include Queensferry (1 mile south-west), Pentre (1 mile south-west), Shotton (1 mile west), Wepre (2 miles west) and Higher Shotton (2 miles south-west). We also work in nearby towns such as Buckley (4 miles south-west), Bwcle (4 miles south-west), Flint (5 miles west), Saltney (4 miles south-east), Mold (7 miles south-west) and Holywell (10 miles north-west).
Near you in Garden City
In Garden City, that means homes near Sealand C.P. School, Hotel Leprechaun and John Summers High School, among other places. The nearest railway station is Hawarden Bridge station, roughly 1 mile west of the centre. Well-known places in the area include West Saltney (1.5 miles south) and Deeside Community Hospital (1.7 miles south-west). Open spaces near Garden City include Burton Mere Wetlands and Shotwick Lake.
About our accreditations · Every repair comes with a one-year guarantee.
