Pembrokeshire · Wales
Bath Re-enamelling in Herbrandston
Fixed-price bath re-enamelling in Herbrandston and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
Questions from Herbrandston
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Bath re-enamelling in Herbrandston without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Whether it’s a coloured bath you want in white and chips and rust in more than one place, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Location
- Herbrandston (SA73)
- Area hub
- Pembrokeshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Herbrandston
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- We come to you, anywhere in the UK
- Most jobs done in one visit
- We leave the room as we found it
- A fixed quote before booking
Read our full price list or bath cost comparison.
What we’re called out for in Herbrandston
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- Stains that will not shift
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- An old resurfacing that is failing
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- How the room is protected while they work
- What prep work is covered
About Herbrandston
Herbrandston is about 2 miles west of Milford Haven, in Pembrokeshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our repair technicians cover all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
We cover every part of the SA73 postcode area. From Fairmeadow Close, Triplestone Close and Haven's Park or anywhere nearby, a technician can come to you. We also travel to Gellyswick (1 mile south-east), Hubberston (2 miles south-east), Liddeston (2 miles east), Haven's Head (2 miles south-east) and Hakin (2 miles south-east). Further out, we also cover Haverfordwest (7 miles north-east), Pembroke (8 miles south-east), Pembroke Dock (7 miles east), The Marsh (7 miles north-east), Green (8 miles south-east) and Pill (3 miles east).
Landmarks near Herbrandston
Typical jobs here are in homes near Church of Saint Mary and Taberna Inn, among other places. Herbrandston’s nearest station is Milford Haven station, about 2.1 miles south-east. Further afield, we also cover the area around Capeston Rath (1 mile north). Open spaces near Herbrandston include North Hill and Hubberstown Pill.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Nearby places to Herbrandston
More services for Herbrandston
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep a parking space free if you can
- Clear the area around the damage
- Let the surface dry out before the visit
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Related advice
Keeping it looking good
Aftercare is simple:
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
