Argyll and Bute · Scotland

Bath re-enamelling & resurfacing in Kames, Argyll and Bute

Full bath re-enamelling and resurfacing at your home in Kames, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Kames?

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

About our bath re-enamelling in Kames

Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and people most frequently call us about staining under the taps and around the waste and a roll-top that’s seen better days.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Location
Kames (PA21)
Area hub
Argyll and Bute
Warranty
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

For landlords and businesses

If you manage property in Kames, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Where we work around Kames

Kames is about 19 miles west of Greenock, in Argyll and Bute. Across the PA21 area, a technician comes to you. We cover all 118 towns and villages across Argyll and Bute, from the larger towns to small villages. Our nearest city page is Glasgow, about 38 miles away.

All of PA21 is within our area, from the main roads to the quietest streets. Other places close to Kames include Tighnabruaich (1 mile north), An Tairbeart (7 miles west), Port Bannatyne (7 miles east), Ardbeg (8 miles east) and Rothesay (8 miles south-east). Further out, we also cover Dunoon (13 miles east), Ceann Loch Gilb (12 miles north-west), Lochgilphead (13 miles north-west), Ardrishaig (11 miles north-west), Sandbank (13 miles north-east) and Innellan (11 miles east). For island and remote addresses, ring us first and we’ll plan the trip.

Landmarks near Kames

We visit homes around Kames. The countryside around Kames includes Cnoc Dubh and Asgog Loch.

Map of Kames © OpenStreetMap contributors

How it works

We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Keep a parking space free if you can
  • Clear the area around the damage
  • Mention any earlier repairs or resurfacing

Get a quote

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.

Send photos for a quote

Read more

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

FAQs for Kames

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you need to take the bath out?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

How long does re-enamelling last?

Care for it and it lasts. Gentle cleaning, no suction mats.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Dry the bath after use to stop limescale
  • Don’t let dyes or oils sit on the finish
  • Never use suction bath mats
  • Stick to gentle, non-abrasive cleaners

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

What we are called out for in Kames

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.

Look out for these signs:

  • A coloured bath you want in white
  • A bath that stays dull however much you clean it
  • An old resurfacing that’s failing
  • Brown or grey marks that don’t clean off

What to look for in a quote

  • How changes to the job are handled
  • Whether they match the colour on site
  • How to care for the finish
  • A fixed price, and whether VAT is included

Our hiring checklist

What we can’t put right

To be straight with you, there are a few things a repair will not fix:

  • A bath that’s rusted through
  • Anything hidden under an old coating, until we remove it
  • Plumbing leaks, which need a plumber

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

Repair or replace: which is better?

A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why Kames customers choose us

  • One price list for the whole UK
  • Usually one visit, start to finish
  • Free fixed quotes from pictures
  • One-year guarantee on every repair

See our pricing or bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.