Herefordshire · England
Bath Re-enamelling in Llanveynoe
Full bath re-enamelling and resurfacing at your home in Llanveynoe, with a one-year guarantee on every repair.
- Resurfacing from £350
- Stains that won’t shift
- Chips and rust in more than one place
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Bath re-enamelling in Llanveynoe, done in place
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with worn patches where water runs and sits and enamel that’s lost its shine and feels rough, we can usually put it right, on basins & shower trays, acrylic baths and pressed steel baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Llanveynoe (HR2)
- Region
- Herefordshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Llanveynoe?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing normally wins. Prices start from £350. We charge the same wherever you are, so there is no premium for Llanveynoe. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- One price list for the entire UK
- We’ll tell you if it’s not worth repairing
- Generally one visit, start to finish
- Dust sheets down, tidy finish
Take a look at our full price list or resurfacing vs replacement cost guide.
What a repair can’t fix
We’d rather lose a job than do one that will not last, so these are the limits:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Llanveynoe and the surrounding area
Llanveynoe is about 10 miles north of Abergavenny, in Herefordshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Llanveynoe is one of 255 places in Herefordshire we cover. You can also see our page for Birmingham, about 58 miles away.
Here we cover the HR2 postcode area. Jobs here include addresses on Olchon Valley and Mountain Road and the roads around them. Close by, we cover Longtown (1 mile south-east), Monmouthshire (2 miles west), Lower Maes-coed (3 miles east), Clodock (3 miles south-east) and Upper Maes-coed (3 miles north-east). Larger places within reach include Hereford (13 miles north-east), Redhill (13 miles east), Newton Farm (12 miles east), Whitecross (13 miles north-east), Eign Hill (14 miles east) and Widemarsh (14 miles north-east).
What’s near Llanveynoe
Locally, our jobs take us to homes close to Church of St Beuno and St Peter, among other places. Further afield, we also cover the area around Longtown Castle (1.5 miles south-east). For a walk, there’s Red Daren and The Parks.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Have chips seen to early
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Keep pets and children out of the room while we work
- Ensure the area is dry
- Let us know if it has been repaired before
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
Common questions in Llanveynoe
Is there any odour?
There can be some smell while we work. It fades as everything cures.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
How long does re-enamelling take?
One day for most baths, ready the next day. We will confirm timings when we quote.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens next?
We come back with a fixed quote, typically with dates to choose from. There is no obligation to book.
Also near Llanveynoe
Other services in Llanveynoe
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Llanveynoe. What changes the price is:
- Previous DIY repairs that have to come out
- The material
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
