Perth and Kinross · Scotland
Bath Re-enamelling for Madderty homes
We travel to Madderty for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
How to look after the repair
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
How we handle bath re-enamelling in Madderty
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with wear marks under the taps and several chips and rust patches, we can typically put it right, on acrylic baths, Victorian roll-tops and pressed steel baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Madderty (PH7)
- Region
- Perth and Kinross
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Madderty
Madderty is about 5 miles north of Auchterarder, in Perth and Kinross. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 107 places across Perth and Kinross. Our nearest city page is Edinburgh, about 35 miles away.
Every address in PH7 is within our area, from the main roads to the quietest streets. Other places close to Madderty include St David's (1 mile south-west), Balgowan (3 miles north-east), Aberuthven (4 miles south-east), Gilmerton (4 miles north-west) and Tullibardine (5 miles south). Within a short drive, we also cover Perth (10 miles east), Crieff (5 miles west), Kinross (15 miles south-east), Letham (9 miles east), Scone (12 miles east) and Tulloch (9 miles east).
What’s near Madderty
Locally, our jobs take us to homes close to East Craigmuir and the streets around them. Other landmarks nearby include St Margaret's Hospital (5.1 miles south) and Strathallan Castle (3.8 miles south-west).
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Madderty
- One price list for the whole UK
- CHAS and Constructionline accredited
- Colour-matched on site
- Fixed prices from your pictures
Take a look at our pricing or resurfacing vs replacement cost guide.
Also near Madderty
What else we do in Madderty
Landlords, agents and businesses in Madderty
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Do you need bath re-enamelling in Madderty?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The most common problems we are called about are:
- Worn patches where water runs and sits
- Stains that will not shift
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
Comparing quotes
- When it can be used again
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
Questions from Madderty
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Madderty. The price comes down to:
- How much damage there is
- Whether old repairs or coatings need taking off
- What the surface is made of
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- The material, if you know it
- One picture of the entire bath
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
