Shropshire · England

Bath Re-enamelling for Montford Bridge homes

Full bath re-enamelling and resurfacing in Montford Bridge, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Montford Bridge

Bath re-enamelling at your home in Montford Bridge

Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are a peeling or bubbling previous coating and a bath that stays dull however much you clean it.

In a village or hamlet like Montford Bridge, homes are often older cottages, farmhouses and barn conversions. Some have heavy cast iron baths or tight bathrooms, and getting a bath out along a lane or up narrow stairs is hard work. Repairing in place avoids that.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.

Technician in a mask working on a freestanding roll-top bath
Location
Montford Bridge (SY4)
Region
Shropshire
Guarantee
One year on every repair
Price
From £350. Fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Repairing versus replacing in Montford Bridge

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Older homes around Montford Bridge may have sizes and fittings that new pieces do not match. Repairing avoids those problems.

Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Colour mixed on the day to match
  • A year’s guarantee on all work
  • Fixed prices from your pictures
  • We come to you, anywhere in the UK

Take a look at our Full price list And Bath cost comparison.

Montford Bridge homes and their baths

Landlords with property near Shrewsbury station (about 4.2 miles east) use us between tenancies, so baths are repaired rather than replaced.

Montford Bridge is about 4 miles west of Shrewsbury, in Shropshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Montford Bridge is one of 433 towns and villages in Shropshire we cover. Our nearest city page is Birmingham, about 44 miles away.

We cover every part of SY4 for bath re-enamelling. Local streets include Holyhead Road, Alloe Brook and The Crescent. Nearby, we also carry out bath re-enamelling in Bicton (1 mile east), Calcott (1 mile south-east), Forton Heath (1 mile north), Ford (2 miles south-west) and Oxon (2 miles south-east). Larger places within reach include Shrewsbury (4 miles east), Oswestry (12 miles north-west), Coleham (4 miles south-east), Kingsland (4 miles south-east), Belle Vue (5 miles south-east) and Monkmoor (5 miles east).

What’s near Montford Bridge

The nearest railway station is Shrewsbury station, about 4.2 miles east. Other landmarks nearby include Shelton Hospital (2.3 miles south-east) and The Parade Shopping Centre (2.9 miles south-east).

Map of Montford Bridge © OpenStreetMap contributors

Signs you need bath re-enamelling in Montford Bridge

Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

These are the problems we are asked about most:

  • Brown or grey marks that don’t clean off
  • Thin, worn enamel in places
  • A bath that stays dull however much you clean it
  • A peeling or bubbling previous coating

If you live in one of the older homes near a church such as Church of Saint Chad, an original cast iron or steel bath is worth keeping, and bath re-enamelling gives it years more use.

Before you book anyone

  • Whether there are any call-out or travel charges
  • What protection goes down before work starts
  • Who turns up on the day
  • Whether cleaning and preparation are in the price

Our hiring checklist

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What a repair can’t fix

Before you book, it’s worth knowing the limits too:

  • Leaking taps or wastes (a plumber’s job)
  • A bath split right through the body
  • A poorly supported acrylic bath, until it’s firmed up

Send us photos and we’ll tell you honestly.

Materials we work on in Montford Bridge

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths

Montford Bridge questions

Do you work for landlords with property near Shrewsbury station?

Yes. Send photos and the address, and we’ll quote.

Do you come out to small places like Montford Bridge?

We do: Montford Bridge is covered like any town. Just mention any tricky access.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Can you change the colour of my bath?

Yes, most people go for white. Mention the colour you want when you send photos.

What does bath re-enamelling cost?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.

Which areas do you work in?

The whole UK, including all of Shropshire. Send your postcode with your photos and we will confirm dates.

Do you cover Montford Bridge?

Yes, we do. We send a technician to Montford Bridge for every job, and the price is the same as everywhere else.

Can I add another job to the visit?

Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.

What we do, step by step

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it. For a rural address like Montford Bridge, we plan the journey in advance: let us know about lanes, gates and parking. We bring everything needed for the bath re-enamelling, so there is no second trip.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Tell us about any previous repairs or coatings
  • Let the surface dry out before the visit
  • Move bottles, mats and clutter away from the area

Get a quote

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Send pictures for a quote

Read more

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Do not leave a chip unrepaired
  • Respect the curing time we give you
  • Repair dripping taps early
  • Store bottles off the bath

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

How we price bath re-enamelling

Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:

  • The material
  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Quotes from your photos

It only takes a minute to photograph the damage. Try to send:

  • The material, if you know it
  • Where you are, by postcode
  • A close-up of the damage, in focus
  • Details of any past repairs

Most customers in Montford Bridge get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.