Telford and Wrekin · England
Bath re-enamelling & resurfacing in Nash, Telford and Wrekin
Bath re-enamelling in and around Nash: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Stains that will not shift
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
About our bath re-enamelling in Nash
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include a coating lifting around the plughole and an original cast iron bath that needs restoring, in basins & shower trays, cast iron baths and pressed steel baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Nash (TF6)
- Area hub
- Telford and Wrekin
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Nash
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we’re asked about most:
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
Comparing quotes
- How soon you can use it again
- If travel is included in the price
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
Nash and the surrounding area
Nash is about 2 miles west of Wellington, in Telford and Wrekin. Customers in Nash get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Nash is one of 79 towns and villages in Telford and Wrekin where we work. We work right across the region, from Nash to Birmingham (32 miles away).
All of TF6 is covered. If you are just outside Nash, we cover Cluddley (1 mile south-east), Little Wenlock (3 miles south-east), Garmston (3 miles south), Eaton Constantine (3 miles south-west) and Coalmoor (3 miles south-east). We also work in nearby towns such as Telford (4 miles east), Dawley (4 miles south-east), Oakengates (4 miles east), Newport (9 miles north-east), The Rock (4 miles east) and Newdale (3 miles east).
Around Nash
Locally, our jobs take us to homes close to Ercall Wood Academy and Church of St Peter. The closest station to Nash is Wellington (Shropshire) station, roughly 1.6 miles east of the centre. Other landmarks nearby include Princess Royal Hospital (2 miles north-east) and Charlton Castle (1.9 miles west). For a walk, there’s The Ercall.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Landlords, agents and businesses in Nash
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Nash as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How to care for the repair
Once the work has cured, treat it gently:
- Respect the curing time we give you
- A dripping tap should be fixed promptly
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What a repair can’t fix
It helps to know what we can’t do too:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
More services for Nash
Nash questions
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Repairing versus replacing in Nash
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Straight answers about what a repair can do
- A fixed quote before booking
- No extra charge for your area
- We come to you, anywhere in the UK
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
