Bath and North East Somerset · England
Bath Re-enamelling for Chew Stoke homes
Bath re-enamelling in Chew Stoke without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- An outdated colour you’d like to change
Bath re-enamelling at your home in Chew Stoke
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. We’re frequently asked to fix a peeling or bubbling previous coating and lots of chips and rust spots, in pressed steel baths, acrylic baths and cast iron baths.
Big or small, it’s backed by a one-year guarantee.
- Area
- Chew Stoke (BS40)
- Area hub
- Bath and North East Somerset
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Chew Stoke
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
You may need us if you’ve spotted:
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that do not clean off
Comparing quotes
- Whether the colour is mixed to match
- How to care for the finish
- A fixed quote, and whether VAT is included
- How your room will be protected
Repair or replace in Chew Stoke?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
What you get with us
- We come to you, anywhere in the UK
- Most jobs done in one visit
- Free fixed quotes from pictures
- No extra charge for your area
Read our prices page and bath cost comparison.
When we would advise against a repair
Before you book, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
FAQs for Chew Stoke
What areas do you cover?
Across the UK, and that includes Chew Stoke. Prices do not change with location.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Where we work around Chew Stoke
Chew Stoke is about 7 miles south-west of Keynsham, in Bath and North East Somerset. Clients in Chew Stoke get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We work in all 136 towns and villages in Bath and North East Somerset, from the larger towns to small villages.
We work across the BS40 postcode area. Streets in the area include Bristol Road, Blind Lane and Bilbie Road. Nearby, we also work in Littleton (1 mile north), Hounsley Batch (1 mile north-west), Chew Magna (1 mile north-east), Lower Strode (1 mile west) and Regil (1 mile west). Within a short drive, we also cover Bath (12 miles east), Keynsham (7 miles north-east), Bathwick (12 miles east), Walcot (12 miles east), Westmoreland (11 miles east) and Kingsmead (11 miles east).
What’s near Chew Stoke
We visit homes around The Stoke pub, St Andrew's Church and Chew Valley School and the streets around them. Other landmarks nearby include Oval enclosure (2.8 miles south-east) and South Bristol Community Hospital (4.5 miles north-east). The countryside around Chew Stoke includes Knowle Hill and Litton Reservoirs.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Places near Chew Stoke
Other services in Chew Stoke
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Whether old repairs or coatings need taking off
- Access to the area
- What the surface is made of
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
What happens on the day
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. You can expect it to take most of the day, and we will keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Open a window if you can
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
