Shropshire · England
Bath Re-enamelling in Ruyton-XI-Towns
Full bath re-enamelling and resurfacing in Ruyton-XI-Towns, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Thin, worn enamel in places
Ruyton-XI-Towns and the surrounding area
Ruyton-XI-Towns is about 8 miles south-east of Oswestry, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Ruyton-XI-Towns is one of 433 places in Shropshire where we work. You can also see our page for Liverpool, about 42 miles away.
Here we cover the SY4 postcode area. Local streets include Grove Court, Church Street and Undercastle Close, all of which we cover. Other places close to Ruyton-XI-Towns include Little Ness (2 miles south-east), Baschurch (2 miles east), Eyton (3 miles east), Grafton (3 miles south-east) and Forton Heath (4 miles south-east). Within a short drive, we also cover Shrewsbury (9 miles south-east), Oswestry (8 miles north-west), Coleham (9 miles south-east), Kingsland (9 miles south-east), Whitchurch (15 miles north-east) and Belle Vue (9 miles south-east).
Around Ruyton-XI-Towns
Locally, our jobs take us to homes close to Church of St John the Baptist, The Corbet School and St John the Baptist CofE (Controlled) Primary School. Other landmarks nearby include Kinton Motte (2.2 miles south-west).
Bath re-enamelling at your home in Ruyton-XI-Towns
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Typical jobs include a peeling or bubbling previous coating and an original cast iron bath that needs restoring, across acrylic baths, cast iron baths and Victorian roll-tops.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Ruyton-XI-Towns (SY4)
- County
- Shropshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Landlords, agents and businesses in Ruyton-XI-Towns
Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Make sure the room can be ventilated
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
If in doubt, send photos and we will say what we think.
Materials we work on in Ruyton-XI-Towns
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Nearby places to Ruyton-XI-Towns
What else we do in Ruyton-XI-Towns
Ruyton-XI-Towns: your questions answered
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How much does bath re-enamelling cost in Ruyton-XI-Towns?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item with your SY4 postcode.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Do you cover the whole of Shropshire?
Across the UK, so Ruyton-XI-Towns is covered. Our prices are the same everywhere.
Do you work in Ruyton-XI-Towns?
Yes, we do. We send a technician to Ruyton-XI-Towns for every job, with no extra charge for travel.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Unusual colours or finishes
- The material and finish
- Whether we combine several jobs
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- A picture taken from further back
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- One visit for most repairs
- Same prices wherever you are
- Fixed prices from your photos
- Technicians who travel to you, UK-wide
Take a look at our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
