Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Townsend, Pembrokeshire
Damaged bath in Townsend? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
Our work in Townsend
Townsend is about 6 miles west of Milford Haven, in Pembrokeshire. From the centre of Townsend to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Townsend is one of 223 towns and villages in Pembrokeshire where we work.
Every address in SA62 is within our area. Close by, we cover Dale (1 mile south-west), St Ishmael's (2 miles north-east), Marloes (2 miles north-west), Hasguard (3 miles north-east) and Hasguard Cross (4 miles north-east). Further out, we also cover Haverfordwest (11 miles north-east), Milford Haven (6 miles east), Pembroke (11 miles east), Pembroke Dock (10 miles east), The Marsh (11 miles north-east) and Green (11 miles east).
Local landmarks in Townsend
Our customers here include homes close to Church of Saint James the Great and The Griffin Inn and the streets around them. Well-known places in the area include Dale Castle (0.5 miles west). The countryside around Townsend includes Brunt Farm Hill.
How we handle bath re-enamelling in Townsend
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We’re often asked to fix a bath in a colour that no longer suits and an original cast iron bath that needs restoring, on pressed steel baths, acrylic baths and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Townsend (SA62)
- Region
- Pembrokeshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Townsend
What else we do in Townsend
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs right away
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Repair or replace in Townsend?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Prices start from £350. We charge the same wherever you are, with no extra for Townsend. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- Usually one visit, start to finish
See our pricing or bath cost comparison.
Common questions in Townsend
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Pembrokeshire.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Landlord and trade work in Townsend
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Townsend. What changes the price is:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- The type of damage
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- The material, if you know it
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
When to call us in Townsend
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Clients typically contact us about:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
Before you book anyone
- How changes to the job are handled
- How your room will be protected
- Who will actually do the work
- Whether the colour is mixed to match
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a full day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Ask for a price
Send us pictures of the damage and one of the whole item, with your SA62 postcode, and we’ll reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
