Aberdeenshire · Scotland
Bath Repair in Crimond
Bath repair in and around Crimond: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Cracks in an acrylic bath
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How much damage there is
- How easy the damage is to reach
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
Phone photos are fine. Just make sure we can see:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- What it’s made of, if you know
- A picture taken from further back
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Bath repair in Crimond, done in place
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and people most often call us about a chip where the taps sit and scuffs and scratches in the surface.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Crimond (AB43)
- County
- Aberdeenshire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Crimond
If you manage property in Crimond, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Landlords, letting agents and housing providers in Crimond use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Keep metal cans and razors off the surface
- Don’t leave a fresh chip for long
- Clean with warm water and a mild detergent
- Fix dripping taps early to stop staining and limescale
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
Get a quote
Most clients in Crimond get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Why repair rather than replace?
Many people think a damaged bath means a new one. Usually it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Crimond
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- One visit for most repairs
See our full price list and resurfacing vs replacement cost guide.
Common questions in Crimond
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Do you cover the entire of Aberdeenshire?
The whole UK, including all of Aberdeenshire. Send your postcode with your photos and we’ll confirm dates.
Are there extra charges for Crimond?
Travel is included in the price, with the same prices everywhere we work.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
What we cannot put right
Before you book, it’s worth knowing the limits:
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
What else we do in Crimond
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Covering Crimond
Crimond is about 7 miles south-east of Fraserburgh, in Aberdeenshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover all 161 towns and villages in Aberdeenshire.
Jobs in AB43 are booked in the same way as anywhere else. Whether you live on Logie Avenue East, Logie Road and The Row or anywhere nearby, a technician can come to you. Close by, we cover Keyhead (1 mile south-east), New Leeds (4 miles west), Kirktown (4 miles south-east), Rora (4 miles south) and St Fergus (4 miles south-east). Larger places within reach include Peterhead (8 miles south-east), Fraserburgh (7 miles north-west), Roanheads (8 miles south-east), Clerkhill (8 miles south-east), Port Henry (8 miles south-east) and Mintlaw (6 miles south-west).
What’s near Crimond
Around Crimond, we work in homes near Crimond Church, among other places. Further afield, we also cover the area around Castle of Rattray (2.3 miles east). The countryside around Crimond includes Loch of Strathbeg.
What we’re called out for in Crimond
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
You may need us if you’ve spotted any of these:
- Snagging damage from a refit
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
- Scuffs and scratches in the surface
Comparing quotes
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
- How long it needs to cure
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
