Aberdeenshire · Scotland
Bath Repair for St Combs homes
Fixed-price bath repair in St Combs and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- A kit repair that didn’t last
Bath repair in St Combs, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on roll-top & freestanding, cast iron enamel and acrylic, and the jobs we see most are a chip where the taps sit and deep scratches in acrylic.
All our work comes with a one-year guarantee, wherever you are in Aberdeenshire.
- Area
- St Combs (AB43)
- Region
- Aberdeenshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in St Combs?
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Most people get in touch when they notice something like this:
- A chip where the taps sit
- Chips along the edge of the bath
- Snagging damage from a refit
- Rust spots around the plughole
What your quote should include
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- Who turns up on the day
- Whether there are any call-out or travel charges
Places near St Combs
Other services in St Combs
What bath repair costs
Prices start from £95. You will know the full cost before you book. We take into account:
- Any earlier repairs that need removing first
- Access to the area
- How many areas need work
- What kind of damage it is
Our prices are the same across the UK, so there’s no premium for St Combs. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- What it’s made of, if you know
- One picture of the whole bath
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
- Ensure an acrylic bath is firm underfoot
- Do not leave a fresh chip for long
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We leave the room as we found it
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
Read our prices page or bath cost comparison.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Get a quote
Send us a photo of the damage and a wider shot of the whole item, and tell us you are in St Combs, and we’ll come back with a fixed quote.
Related advice
Covering St Combs
St Combs is about 4 miles south-east of Fraserburgh, in Aberdeenshire. From the centre of St Combs to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 161 towns and villages across Aberdeenshire.
Here we cover the AB43 postcode area. That includes homes on High Street, West Street and Charles Street. If you’re just outside St Combs, we cover Inverallochy (1 mile north-west), Crimond (4 miles south), Fraserburgh (4 miles north-west), Keyhead (5 miles south) and Broadsea (5 miles north-west). Within a short drive, we also cover Peterhead (11 miles south), Roanheads (11 miles south-east), Clerkhill (12 miles south), Port Henry (12 miles south-east), Mintlaw (10 miles south) and Boddam (14 miles south).
Near you in St Combs
We visit homes around St Combs, among other places. Nearby you will also find Inverallochy Castle (0.8 miles west) and Fraserburgh Hospital (4.5 miles north-west). The countryside around St Combs includes Loch of Strathbeg.
When we would advise against a repair
A repair isn’t right for every job, for example:
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Landlords, agents and businesses in St Combs
We carry out planned and one-off repairs for housing associations and facilities teams in Aberdeenshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
St Combs: your questions answered
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
About our accreditations · Every repair comes with a one-year guarantee.
