Perth and Kinross · Scotland
Bath chip & crack repair in Scoonieburn, Perth and Kinross
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Scoonieburn and across Perth and Kinross. Free, fixed quotes from your pictures.
- Repairs from £95
- Damage beneath the taps
- Hairline or through cracks in acrylic
Bath repair in Scoonieburn, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for hairline or through cracks in acrylic and damage done while the bathroom was being fitted, across whirlpool & spa baths, acrylic and cast iron enamel.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Scoonieburn (PH2)
- County
- Perth and Kinross
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a few hours, depending on the damage. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
Getting a price
Send us photos of the damage and one of the whole item, and tell us you’re in Scoonieburn, and we will come back with a fixed quote.
Advice
Towns and villages near Scoonieburn
More services for Scoonieburn
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Get any new chip repaired before it rusts
- If an acrylic bath flexes, have its feet adjusted
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Scoonieburn: your questions answered
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
What happens after I send photos?
We come back with a fixed price. You’re under no obligation.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
- Wear across the entire surface, which needs re-enamelling
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
What affects the price in Scoonieburn
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- Where the damage is and how we get to it
- The colour and finish to match
- Doing more than one item at once
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from photos
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- What it’s made of, if you know
- One picture of the whole bath
The quickest way to a price is to send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Do you need bath repair in Scoonieburn?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Common reasons people in Scoonieburn contact us are:
- A hole punched through by something heavy
- A failed DIY repair that is discoloured or lifting
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
What to look for in a quote
- What aftercare is recommended
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
Landlord and trade work in Scoonieburn
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Scoonieburn and the surrounding area
Scoonieburn is about 2 miles south-east of Perth, in Perth and Kinross. Our technicians come to clients in Scoonieburn and nearby villages, so nothing has to leave your home. We work in all 107 towns and villages across Perth and Kinross, from the larger towns to small villages. We work right across the region, from Scoonieburn to Edinburgh (31 miles away).
All of PH2 is covered. That includes homes on Ethel Moorhead Place, Frances Gordon Road and Scoonieburn Hill. Nearby, we also work in Tarsappie (1 mile east), Oakbank (2 miles north-west), Perth (2 miles north-west), Bridge of Earn (2 miles south) and Forgandenny (3 miles south-west). We also work in nearby towns such as Blairgowrie and Rattray (15 miles north), Auchterarder (12 miles south-west), Kinross (11 miles south), Letham (3 miles north-west), Scone (3 miles north) and Tulloch (3 miles north-west).
Around Scoonieburn
Our customers here include homes close to Perth High School and the streets around them. The nearest railway station is Perth station, about 1.4 miles north-west. Nearby you’ll also find St John's Shopping Centre (1.6 miles north) and Murray Royal Hospital (1.8 miles north). Not far away are Friarton Hill.
About our accreditations · Every repair comes with a one-year guarantee.
