Perth and Kinross · Scotland
Bath chip & crack repair in Milltown of Aberdalgie, Perth and Kinross
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Milltown of Aberdalgie and across Perth and Kinross. Free, fixed quotes from your photos.
- Repairs from £95
- Deep scratches in acrylic
- Chips on the rim or sides
Repair or replace in Milltown of Aberdalgie?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- A fixed quote before you book
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
Take a look at our full price list and guide to resurfacing and replacement costs.
Bath repair at your home in Milltown of Aberdalgie
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Common call-outs are for chips along the edge of the bath and a failed DIY repair that’s discoloured or lifting, across cast iron enamel, acrylic and whirlpool & spa baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Milltown of Aberdalgie (PH2)
- County
- Perth and Kinross
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
We will always be straight with you, so here’s what a repair cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we will tell you honestly.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Places near Milltown of Aberdalgie
Also in Milltown of Aberdalgie
Milltown of Aberdalgie: your questions answered
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can I get a quote without a visit?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work in Milltown of Aberdalgie?
Yes. We work across the UK and travel to Milltown of Aberdalgie and the rest of Perth and Kinross. Send us photos for a fixed quote, or call 0345 017 0787.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair something that is been repaired before?
Generally, yes. The old repair comes out first, so mention it when you send pictures.
How do I get a price for bath repair in Milltown of Aberdalgie?
Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Common problems we fix in Milltown of Aberdalgie
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.
These are the problems we are asked about most:
- A chip where the taps sit
- Cracks in an acrylic bath
- Rusty patches near the plughole
- Chips caused by builders
What your quote should include
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- How long the guarantee is and what it covers
Looking after it afterwards
Once the work has cured, treat it gently:
- Get any new chip repaired before it rusts
- Get a dripping tap fixed promptly
- Don’t scrub with anything abrasive
- Keep metal cans and razors off the surface
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
What bath repair costs
Repairs from £95. You will not pay by the hour. The price depends on:
- Doing more than one item at once
- The size and number of damaged areas
- What the surface is made of
- What kind of damage it is
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
For landlords and businesses
If you manage property in Milltown of Aberdalgie, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a morning or an afternoon, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the day after, the bath is ready to use.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Ask for a price
If you’re in Milltown of Aberdalgie and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Milltown of Aberdalgie and the surrounding area
Milltown of Aberdalgie is about 3 miles south-west of Perth, in Perth and Kinross. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in all 107 towns and villages in Perth and Kinross. Our jobs stretch from Milltown of Aberdalgie to Edinburgh (about 31 miles away).
Our repair technicians cover all of the PH2 postcode area and the streets around it. Main roads around Milltown of Aberdalgie include the B9112, so getting to you is simple. Nearby, we also work in Forgandenny (2 miles south-east), Oakbank (2 miles north-east), Perth (3 miles north-east), Scoonieburn (3 miles east) and Tarsappie (3 miles east). Further out, we also cover Crieff (13 miles west), Auchterarder (9 miles south-west), Kinross (11 miles south), Scone (5 miles north-east), Tulloch (3 miles north) and Coupar Angus (15 miles north-east).
Near you in Milltown of Aberdalgie
Around Milltown of Aberdalgie, we work in homes near Aberdalgie Parish Church and Churchyard and Perth High School, among other places. Milltown of Aberdalgie’s nearest station is Perth station, about 2.8 miles north-east of the centre. Well-known places in the area include Dupplin Castle (0.5 miles south-west) and St John's Shopping Centre (3.2 miles north-east). Open spaces near Milltown of Aberdalgie include Dupplin Lake and Mailer Hill.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
