Perth and Kinross · Scotland
Bath chip & crack repair in Tarsappie, Perth and Kinross
We travel to Tarsappie for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Damage beneath the taps
How we handle bath repair in Tarsappie
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Whether it’s cracks in an acrylic bath and a hole punched through by something heavy, we can typically put it right, on cast iron enamel, whirlpool & spa baths and pressed steel enamel alike.
Whatever the size of the job, you get the same one-year guarantee in Tarsappie and across Perth and Kinross.
- Area
- Tarsappie (PH2)
- County
- Perth and Kinross
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There is no area surcharge for Tarsappie. The price reflects:
- How many items we do on one visit
- How much damage there is
- The material and finish
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. You will see the full price before booking.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- The postcode, so we can plan the visit
- Any details about the material
- Any earlier repairs or coatings
- A clear, close picture of the problem area
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Places near Tarsappie
Also in Tarsappie
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Perth and Kinross and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Before we arrive
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
About Tarsappie
Tarsappie is about 2 miles south-east of Perth, in Perth and Kinross. We visit homes and businesses in Tarsappie, so nothing has to leave your home. Tarsappie is one of 107 places in Perth and Kinross we cover. You can also see our page for Edinburgh, about 31 miles away.
Every address in PH2 is within our area, from the main roads to the quietest streets. Other places close to Tarsappie include Scoonieburn (1 mile west), Bridge of Earn (2 miles south), Oakbank (2 miles north-west), Perth (2 miles north-west) and Forgandenny (3 miles south-west). Larger places within reach include Blairgowrie and Rattray (15 miles north), Auchterarder (12 miles south-west), Kinross (11 miles south), Letham (3 miles north-west), Scone (3 miles north) and Tulloch (4 miles north-west).
Near you in Tarsappie
Tarsappie’s nearest station is Perth station, about 1.7 miles north-west. Further afield, we also cover the area around St John's Shopping Centre (1.8 miles north-west) and Perth Museum (1.8 miles north-west). The countryside around Tarsappie includes Moncreiffe Hill.
Questions from Tarsappie
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Which areas do you work in?
The entire UK, including all of Perth and Kinross. Send your postcode with your photos and we will offer you dates.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you work in Tarsappie?
Yes. We cover the entire UK and come to Tarsappie. Send pictures and we will quote, or call 0345 017 0787.
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
What a repair can’t fix
Some jobs are not right for a repair, including:
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Signs you need bath repair in Tarsappie
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Signs it’s time to call us include:
- Rusty patches near the plughole
- A kit repair that didn’t last
- A cracked acrylic bath
- Chips on the rim or sides
What to look for in a quote
- Whether cleaning and preparation are in the price
- How soon you can use it again
- What protection goes down before work starts
- How to care for the finish
How to look after the repair
Aftercare is simple:
- Have new chips seen to early
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- Protect the bath with a towel when doing jobs nearby
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
About our accreditations · Every repair comes with a one-year guarantee.
