Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Angle, Pembrokeshire
Local bath re-enamelling for Angle: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Bath re-enamelling at your home in Angle
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and the jobs we see most are a peeling or bubbling previous coating and a dull, rough surface that won’t come clean.
Every repair comes with a one-year guarantee.
- Location
- Angle (SA71)
- County
- Pembrokeshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- Whether old repairs or coatings need taking off
- Access to the area
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, with no extra for Angle. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Angle and the surrounding area
Angle is about 3 miles south-west of Milford Haven, in Pembrokeshire. Jobs in Angle are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Angle is one of 223 places in Pembrokeshire where we work.
We cover every part of the SA71 postcode area. Streets in the area include Shirburn Close and West Bay Close. Other places close to Angle include Gellyswick (2 miles north-east), Rhoscrowther (3 miles east), Hubberston (3 miles north-east), Hakin (3 miles north-east) and Haven's Head (3 miles north-east). Further out, we also cover Haverfordwest (10 miles north-east), Milford Haven (3 miles north-east), Pembroke (8 miles east), Pembroke Dock (6 miles east), The Marsh (10 miles north-east) and Green (8 miles east).
Landmarks near Angle
In Angle, that means homes near Hibernia Inn and Church of St Mary and the streets around them. The closest station to Angle is Milford Haven station, roughly 3 miles north-east. Further afield, we also cover the area around North Hill (under half a mile north) and South Pembrokeshire Hospital (5.8 miles east). Not far away are Hubberstown Pill and North Hill.
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Advice
Landlords, agents and businesses in Angle
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Angle use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What we can’t put right
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Send us pictures and we will tell you honestly.
Materials we work on in Angle
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Also in Angle
Questions from Angle
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Signs you need bath re-enamelling in Angle
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
People usually call us when they notice one of these:
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- Several chips and rust patches
- A period or roll-top bath worth keeping
Questions to ask before booking
- What aftercare is recommended
- How long the guarantee is and what it covers
- How soon you can use it again
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
