Flintshire · England
Bath re-enamelling & resurfacing in Poulton, Flintshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Poulton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Poulton
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We are frequently asked to fix staining under the taps and around the waste and enamel that’s lost its shine and feels rough, on basins & shower trays, pressed steel baths and Victorian roll-tops.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Poulton (CH4)
- Region
- Flintshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Simple care helps the repair last. Our advice:
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
FAQs for Poulton
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
How do I get a price for bath re-enamelling in Poulton?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item with your CH4 postcode.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Poulton. The price depends on:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your pictures
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- Something in shot to show the size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A photo taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
Before we arrive
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Getting a price
Email us a picture of the damage and one of the whole item, with your CH4 postcode, and we’ll come back with a fixed quote.
Advice
Signs you need bath re-enamelling in Poulton
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Contact us if you’ve noticed any of these:
- Several chips and rust patches
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
What to look for in a quote
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- What protection goes down before work starts
- Who will actually do the work
Poulton and the surrounding area
Poulton is about 4 miles south of Chester, in Flintshire. Anywhere in CH4, we come to you. Poulton is one of 139 places in Flintshire where we work. Our nearest city page is Liverpool, about 19 miles away.
Every address in CH4 is within our area. Streets in the area include Straight Mile and Pulford Approach, all of which we cover. Other places close to Poulton include Cuckoo's Nest (1 mile north-west), Belgrave (1 mile north-west), Pulford (1 mile west), Lavister (2 miles south-west) and Darland (2 miles south-west). Larger places within reach include Connah's Quay (9 miles north-west), Buckley (8 miles west), Bwcle (8 miles west), Flint (12 miles north-west), Saltney (3 miles north) and Mold (10 miles west).
Near you in Poulton
Around Poulton, we work in homes near Darland High School. The nearest railway station is Chester station, roughly 4.7 miles north. Other landmarks nearby include Trevalyn Manor (2.6 miles south-west) and Roft Motte (3.2 miles south-west). Green spaces nearby include The Flash.
Also in Poulton
Work for landlords and builders
For anyone letting property in or around Poulton, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Why Poulton clients choose us
- No need to remove anything
- Rooms protected and left tidy
- Colour-matched on site
- Usually one visit, start to finish
Take a look at our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
