Moray · Scotland
Bath Re-enamelling for Cummingston homes
Local bath re-enamelling for Cummingston: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
How we handle bath re-enamelling in Cummingston
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a coating lifting around the plughole and a bath that stays dull however much you clean it, we can typically put it right, on basins & shower trays, cast iron baths and acrylic baths alike.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Cummingston (IV30)
- County
- Moray
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes most of the day in most cases. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Work for landlords and builders
Landlords, letting agents and housing providers in Cummingston use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Honest limits
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Your questions about bath re-enamelling in Cummingston
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
How long does re-enamelling take?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Are there extra charges for Cummingston?
We do not add a call-out fee. Your fixed price includes everything.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The type of damage
- Where the damage is and how we get to it
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Photographing the damage takes a minute. Try to send:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Something in shot to show the size
- A close-up of the damage, in focus
For a price in Cummingston, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Where we work around Cummingston
Cummingston is about 7 miles north-west of Elgin, in Moray. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in 58 places in Moray, from the larger towns to small villages.
Here we cover the IV30 postcode area. We regularly work on streets such as Seaview Road and Back Street and the roads around them. Other places close to Cummingston include Backlands (1 mile east), Hopeman (1 mile east), Burghead (1 mile west), College of Roseisle (2 miles south) and Duffus (2 miles east). Within a short drive, we also cover Elgin (7 miles south-east), Forres (9 miles south-west), Lossiemouth (6 miles east), Ashgrove (7 miles south-east), Fochabers (15 miles south-east) and Lhanbryde (10 miles south-east). For island and remote addresses, call first so we can plan the visit.
Landmarks near Cummingston
Nearby you will also find Spynie Hospital (5.5 miles south-east) and Inverugie Castle (1.2 miles east).
Why repair rather than replace?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- A fixed quote before you book
- A year’s guarantee on all work
- Straight answers about what a repair can do
- Rooms protected and left tidy
Take a look at our pricing or resurfacing vs replacement cost guide.
More services for Cummingston
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
