Wiltshire · England
Bath re-enamelling & resurfacing in Tuckingmill, Wiltshire
Our technicians come to Tuckingmill for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- A coloured bath you want in white
Landlords, agents and businesses in Tuckingmill
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling in Tuckingmill, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, and can be used again the following day. Common call-outs are for lots of chips and rust spots and a period or roll-top bath worth keeping, in acrylic baths, pressed steel baths and Victorian roll-tops.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Tuckingmill (SP3)
- Area hub
- Wiltshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
A repair isn’t always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Common problems we fix in Tuckingmill
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people get in touch after spotting one of these:
- A bath that stays dull however much you clean it
- Stains that will not shift
- Thin, worn enamel in places
- A peeling or bubbling previous coating
What to look for in a quote
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Common questions in Tuckingmill
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We’ll confirm timings when we quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so let us know about it.
Do you come to Tuckingmill?
Yes. We cover the whole UK and travel to Tuckingmill. Send us photos for a fixed quote, or call 0345 017 0787.
Can you price it without visiting?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a full day. Before we go, we’ll explain how long to leave it and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say straight away if a repair is the right fix.
Advice
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Also near Tuckingmill
Also in Tuckingmill
Repair or replace in Tuckingmill?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why book with us
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- One visit for most repairs
See our prices page or guide to resurfacing and replacement costs.
Our work in Tuckingmill
Tuckingmill is about 6 miles north-east of Shaftesbury, in Wiltshire. Anywhere in SP3, we come to you. Our technicians cover 425 places in Wiltshire, from the larger towns to small villages.
Postcode districts we cover here: SP3. Streets in the area include Hatch Lane and Monmouth Road, and we cover them all. If you are just outside Tuckingmill, we cover Tisbury (1 mile north-east), Hazeldon (1 mile south), Upper Chicksgrove (2 miles east), Ansty (2 miles south-east) and Ridge (2 miles north-east). Within a short drive, we also cover Salisbury (13 miles east), Westbury (14 miles north), Warminster (11 miles north-west), Bugmore (13 miles east), Milford (13 miles east) and Old Sarum (14 miles east).
What’s near Tuckingmill
Locally, our jobs take us to homes close to St John's Church of England Primary School and Church of St John the Baptist. Tuckingmill’s nearest station is Tisbury station, about 0.6 miles east. Further afield, we also cover the area around Old Wardour Castle (1.7 miles south). The countryside around Tuckingmill includes Fonthill Lake and Swallowcliffe Down.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
