Perth and Kinross · Scotland
Bath Repair for Kinfauns homes
Fixed-price bath repair in Kinfauns and the surrounding area, usually in one visit.
- Repairs from £95
- A hole punched through by something heavy
- A failed DIY repair that is discoloured or lifting
What we’re called out for in Kinfauns
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted:
- A chip where the taps sit
- Hairline or through cracks in acrylic
- Rust spots around the plughole
- A kit repair that didn’t last
Comparing quotes
- Whether a trained technician does the job
- The length of the guarantee and what it covers
- Aftercare advice
- If travel is included in the price
Bath repair in Kinfauns, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for impact holes in acrylic and rusty patches near the plughole, in whirlpool & spa baths, roll-top & freestanding and acrylic.
Big or small, you get the same one-year guarantee.
- Location
- Kinfauns (PH2)
- County
- Perth and Kinross
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Kinfauns
Also in Kinfauns
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Kinfauns
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
Landlords, agents and businesses in Kinfauns
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How the visit works
You do not need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Read more
What bath repair costs
Prices start from £95. You will know the full cost before you book. We look at:
- How many items we do on one visit
- Unusual colours or finishes
- Where the damage is and how we get to it
- The material and finish
We charge the same wherever you are, with no extra for Kinfauns. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- A wider photo showing the entire bath
- Something in shot to show the size
- One sharp close-up of the damage
If you’re in Kinfauns and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Kinfauns questions
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
What happens once I’ve sent photos?
You will get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can you repair a hole in a bath?
Usually. Photos of the hole and the underside help us check.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Kinfauns and the surrounding area
Kinfauns is about 4 miles east of Perth, in Perth and Kinross. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Kinfauns is one of 107 places in Perth and Kinross where we work. Our nearest city page is Edinburgh, about 31 miles away.
Here we cover the PH2 postcode area. We also cover the places around Kinfauns: Glencarse (2 miles east), St Madoes (2 miles south-east), Tarsappie (3 miles west), Scoonieburn (3 miles west) and Scone (3 miles north-west). We also work in nearby towns such as Perth (4 miles west), Blairgowrie and Rattray (14 miles north), Auchterarder (15 miles south-west), Kinross (12 miles south), Letham (5 miles west) and Tulloch (5 miles north-west).
Around Kinfauns
Around Kinfauns, we work in homes near Kinfauns and the streets around them. Kinfauns’s nearest station is Perth station, about 3.4 miles west. Other landmarks nearby include Perth Museum (3.1 miles west) and Kinfauns Castle (1.1 miles west). Green spaces nearby include Kinnoull Hill.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- Fixed prices from your photos
Take a look at our prices page and guide to resurfacing and replacement costs.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Store metal items away from the bath
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Stick to mild cleaners and a soft cloth
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
