Flintshire · England
Bath re-enamelling & resurfacing in Eccleston, Flintshire
Full bath re-enamelling and resurfacing in Eccleston, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Eccleston
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on basins & shower trays, Victorian roll-tops and cast iron baths, and common reasons people get in touch are an original cast iron bath that needs restoring and a bath that stays dull however much you clean it.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Eccleston (CH4)
- Region
- Flintshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Eccleston
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- Several chips and rust patches
- A period or roll-top bath worth keeping
- Wear marks under the taps
What to look for in a quote
- How soon you can use it again
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Whether the price is fixed and includes VAT
Keeping it looking good
To keep it looking its best:
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow most of the day, and we will tell you if anything changes.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
Our work in Eccleston
Eccleston is about 3 miles south of Chester, in Flintshire. From the centre of Eccleston to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Eccleston is one of 139 towns and villages in Flintshire where we work. We work right across the region, from Eccleston to Liverpool (17 miles away).
Every address in CH4 is within our area, from the main roads to the quietest streets. From Church Road, Paddock Road and Rake Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Huntington (1 mile north-east), Handbridge (2 miles north), Queens Park (2 miles north), Bruera (2 miles south-east) and Saighton (2 miles east). Larger places within reach include Connah's Quay (9 miles north-west), Buckley (9 miles west), Bwcle (8 miles west), Flint (12 miles north-west), Mold (11 miles west) and Coppa View (8 miles west).
Landmarks near Eccleston
Our customers here include homes close to Eccleston C-of-E Primary School, St Mary's Church and Westminster Park. The nearest railway station is Chester station, roughly 2.8 miles north. Other landmarks nearby include Chester (1.9 miles north) and Chester Castle (2.1 miles north). Green spaces nearby include Hockenhull Platts.
Repair or replace in Eccleston?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Eccleston clients choose us
- Fixed prices from your photos
- Straight answers about what a repair can do
- One visit for most repairs
- Work done at your home or business
See our full price list or resurfacing vs replacement cost guide.
Eccleston: your questions answered
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
How much does bath re-enamelling cost in Eccleston?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How many items we do on one visit
- How hard the colour is to match
- What the surface is made of
- The type of damage
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from photos
You can usually get a fixed price without us visiting. To help us price it:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- A picture taken from further back
- The postcode, so we can plan the visit
To get a price, send a couple of photos using our quote form or ring us. We will say right away whether it can be repaired.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Places near Eccleston
What else we do in Eccleston
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Landlord and trade work in Eccleston
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
